Trout master #2 - #7 fly rod build kit

Trout master fly rod uplocking component build kit  for single handed fly rods #2 - #7

Suitable for blanks with a butt diameter not exceding 9.5mm (please check before purchase).  On request we can supply a butt OD reducing spigot to mount this kit on a rod with a butt OD or more than 9.5mm, and fitting instructions.

A convenient and affordable build kit with good value and quality components that will serve you well, saving around 10% compared to buying the components individually.

Handle: Good Cork grade 7" 'fishtail' RHW grip, or upgrade to Great Cork grade. The handle will be inlet to fit the supplied reel seat.  If you buy the kit with one of our blanks in the same order, we will also ream the grip to fit the blank.

Seat: FRC UL6M uplocking reel seat in clear silver with one lock ring, sandalwood insert and an endcap. Black/TiCH reel seat comes with a dyed sandalwood insert.  

Guides: Appropriately sized Pac Bay or Seaguide snake or single foot guide set, colour matched to the reel seat.  Select the colour, line rating and rod length you require.

For rods up to 9', we provide nine running guides and one stripping guide (either standard lined or anti-tangle lined), a small hook keeper and a standard loop tip ring. Eleven running guides plus stripper are provided in the 9'-11' length option.

Line rating #2/3/4 starts with guide size #1/0 and the stripper is #10.   Line rating #5/6 starts with guide size #1, the stripper is #12. 

See also the Trout master #5 - #8 kit, with either a slim full wells or fishtail RHW grip, both with a fighting butt, and an SUL2 seat supplied with two lock rings and a fighting butt trim band.

Please Note sometimes components may change due to availability or their suitability with a blank ordered